• Telescopic Sliding Gates are used a ground mounted rail (track) for the gate wheels to move on it same as sliding gates.
  • Telescopic sliding gates have gate leaves more than 1 gate leaf which work telescopically. The gate leaves are nesting each other while the gate opening and closing.
  • There is opportunity for Trackless Sliding Gate (Cantilever Sliding Gate) if the ground is not suitable for rail installation. Because these gates have not rail (track) to move.
  • Telescopic sliding gates are mostly used to controlled entry/exit at the gates and blocking the entrances.
  • Telescopic sliding gates are closed long vehicle entrances, but they occupy less place at back of the sliding gate.
  • Some companies achieved Sliding Gate Crash Test Certificate from accredited laboratories like PAS:68, DOS K-12, ASTM F 2656, IWA 14-1.

For more information, visit Optima Engineering.

What are Telescopic Sliding Gate parts?

  • Telescopic Sliding Gate’s moving part is made from heavy strong steel.
  • Telescopic Sliding Gates are operated by a sliding gate motor electromechanically.
  • The gates have rack gear for moving horizontally.
  • Gate wheels are heavy duty which carry the gate.
  • The gate leaves connected each other with a steel rope. Telescopic sliding gate mechanism consist of this steel rope.
  • If the gate is telescopic cantilever sliding door, it has own cantilever sliding gates rollers.

For more information, visit Optima Engineering.

How does a Telescopic Sliding Gate work?

  • Telescopic Sliding Gates have a push button console which is placed to operate it.
  • Kind of Access Control Systems, card reader systems, remote control systems can be connected to operate the telescopic sliding gates.
  • Basically, the door opener unit has a gear which is turning via AC Motor. This gear transmits the movement to the rack gear as linear movement. Thus, the telescopic sliding gates slides.
  • In a nutshell, first telescopic sliding gate leaf is connected to second leaf with special steel rope mechanism. While the motor is driving first leaf of telescopic sliding gate, the first leaf pulls second leaf help of steel rope. Thus, both leaf moves together telescopically.
  • Some of telescopic sliding gate manufacturers use chain gear mechanism instead of steel rope to pull second leaf.
  • In case of power failure, it is possible to open and close it. Most of telescopic sliding gate mechanism has a clutch system to release motor from the gears. When the gears are released from motor, the gate can slide easily with manpower.

For more information, visit Optima Engineering.

What is Telescopic Sliding Gate benefits and features?

  • Telescopic sliding gates are mostly manufactured hollow section profiles. (Rectangular Hollow Sections)
  • They can close large openings. Telescopic sliding gates are available to close long entry but short back areas.
  • Telescopic sliding gates may be made from wrought iron for private property garden gates.
  • Telescopic sliding gates may be made from wire mesh fence for industrial site entrances same as existing fences.

For more information, visit Optima Engineering.



No responses yet

Leave a Reply

Your email address will not be published. Required fields are marked *