Electromechanical arm barriers are electromechanical devices designed to control vehicle entrances/exits. Barriers generally consist of barrier stell housing, electrical drive mechanism with gearbox and electronic control board. After the user gives the trigger signal to the system, the barrier mechanism moves the arm up-down and in this way, vehicle access are taken under the control.

To give details about the system; There are electric motor, gearbox, electronic box inside the barrier housing. On the electric motor side, asynchronous AC motor and DC motor are generally preferred. The gearbox transmits the drive to the mechanism by reducing the output speed of the motor. The control of the barrier is also done with an electronic board. The sensors, buttons and motor trigger of the barrier are controlled by this electronic board. The safety of the barrier is provided by electronic sensors called photocells. If the pedestrian or vehicle passes under the barrier arm while the barrier is closing; This movement is detected by the photocell and allows the arm to rise again. Thus, possible accidents are prevented. Thanks to the IOT (Internet of Things) control card, the barrier can also be controlled with a mobile devices. IOT cards working with sim card, wifi and bluetooth; It allows the user to control the system from their mobile device by communicating with mobile applications.

While choosing the electromechanical barrier, particular attention is paid to the area and frequency of use. Products with a long mechanical life should be preferred in frequently used areas such as bus stations and airports.

For more information, visit Optima Engineering.



No responses yet

Leave a Reply

Your email address will not be published. Required fields are marked *